News-Foshan Xiongsin Die Casting Co.,Ltd

News

How to surface treatment and processing of zinc alloy die casting?

Zinc alloy die-casting is a precision casting method that uses high pressure to force molten metal into a complex shaped metal mold. There are more post-processing processes for aluminum alloy products, mainly based on the following:

2023

What cooling and temperature control techniques are available for aluminum die casting molds?

What cooling and temperature control techniques are available for aluminum die casting dies? During the continuous production of die casting dies, in most cases, it is necessary to manually enhance the cooling by cooling the die head with water or by using heat transfer oil (heat transfer oil) to control the temperature of the die head.

2023

【Auto Mould】How to maintain auto moulds The maintenance steps of auto moulds

The primary maintenance of the mold refers to the daily maintenance of the mold by the operator in the production, the main contents are cleaning and rubbing, lubrication and inspection.

2023

China mold industry market depth analysis

Die steel is used to manufacture cold punching dies, hot forging dies, die-casting dies and other molds of steel, is the main processing tool for manufacturing parts in industrial sectors such as machinery manufacturing, radio instrumentation, electrical machinery, electrical appliances. As a variety of mold applications are very different, complex working conditions, so the specific mold steel performance, such as strength, wear resistance, thermal conductivity, processability requirements are different. Mold steel according to the use of general can be divided into cold work mold steel, hot work mold steel and plastic mold steel three categories, used for forging, stamping, cutting type, die-casting, etc..

2023

Car headlight decorative frame

Auto headlight trim frame is one of the most important parts on the headlight, with strict appearance requirements, and the mold needs electroplating treatment. For auto headlight trim frame moulds, the following points should be noted when designing:

2023

Xiongsin Die Casting was audited by Toyota, Honda and Mitsubishi

From October 2014 to May 2015, Xiongsin Die Casting has passed the supplier audit of Toyota, Honda and Mitsubishi. This marks the formal inclusion of Xiongsin into the global supply system of Japanese auto parts, and also shows that Xiongsin's process technology level has stepped up to a new level. Of course, we will not be satisfied with this achievement, in the future, Xiongshin will continue to forge ahead and strive for excellence.

2023

High frequency quenching application technology for sheet metal stamping dies

As the market becomes more and more competitive, all molds will tend to be short cycle, high quality and low cost, and air conditioner type molds are no exception. For the air conditioner class projects such as chassis, outer cover, partition and other tensile forming molds, the heat treatment of forming plates currently used are heat treatment of the whole plate.

2022

Aluminum die casting to solve the casting porosity method introduction

First analyze the cause of the formation of pores, and then take appropriate measures.

2022

High-end ultra-precision die-cutting research and development

It is a stamping process with a small gap under a strong crimp. The principle is that the shaped ring on the guiding platen is pressed into the sheet metal near the edge of the concave die, and then the punching force is applied to the sheet under counter-pressure so that the material inside the edge is squeezed into the cavity of the concave die under three-way compressive stress, resulting in ultra-precise stamped parts.

2022

What are the factors that affect the structure of precision mold processing?

1. Cavity arrangement. Determine the number of cavities and their arrangement according to the geometric structure characteristics of the plastic part, dimensional accuracy requirements, batch size, ease of mold manufacturing, mold cost, etc.

2022

< 1 >

sales@xiongxindiecasting.com

0757-85109903

Tel

0757-85109903

Foshan Xiongsin Die Casting Co.

Address:No.3, Shunfu East Road, Lishui Town, Nanhai District, Foshan City, China and Gui Industrial Park B
Phone:0757-85109903
Fax:0757-85107703
Email:sales@xiongxindiecasting.com